HKD$ 69 HKD$ 59
Apply at temperatures between 5°C to 40°C. Trim end of nozzle to obtain the correct bead width and place cartridge in applicator gun.
Apply sealant in a steady continuous bead ensuring good contact with both sides of the joint to achieve the required adhesion. Tool off with a silicone applicator to finish the joint smoothly before a skin forms, approximately 10 minutes.
While the silicone is still wet,clean off any excess. If joint edges have been masked, remove tape whist the sealant is still wet. It is possible to work in sections as ARDEX SN+ adheres excellently to already cured ARDEX SN+ silicone if it is dry and free from dust.
Cleaning and removal:
If the silicone has dried on the surface, clean with white spirit solvent to soften the silicone then scrape off with a blade.
Colour choices: Transparent / White / Vanilla* / Ivory* / Light Grey* / Cement* / Volcano* / Black*
*Besides Transparent and White, lead-time of around 7 days is expected for other colours.