The calculated quantity based on your input will be reflected in the quantity above
Quantity Calculator is provided as a guide only. These calculations are based on official coverage data, with one coat of primer and two coats of body coat, plus 20% of wastage buffer.
ARDEX WPM 300 (HydrEpoxy 300) Water Based Epoxy Membrane is a two component water based epoxy polyamide membrane/barrier coating.
Approved for use with potable (drinking) water, independent testing confirms conformity with the requirements of AS4020.2000 & BS6920.
Finish: semi-gloss going to matt with ageing
Volume solids: ~44%
Wet film thickness: 300 micrometers per coat
Dry film thickness: 300 micrometers two coats
Recoat time: 4 hours @ 23°C& 50% R.H.
Full cure: 7 days @ 23°C& 50% R.H.
Pot life: 2 hours @ 23°C
1 hour @ 35°C